LABORATORYWARE

Biology | Electricity & Magnetism | Heat | Light | Mechanics | Sound

Laboratoryware | Porcelainware | Glassware| Online Store

<Prev | Next>

 SUPPORT STANDS, RECTANGULAR, CAST IRON BASES

 

Rugged base for stability. Base drilled and tapped on edge (except the 300 x 150mm base, which has two holes). Plated steel rod can be unscrewed from the base for storage. Chemical-resistant, baked enamel finish Undercoated.

Base Size (l x w)
mm (in)

Rod Size (d x l)
mm (in)

Cat. No.

150 x 100 (6 x 4)

10 x 450 ( 25/64 x 18)

2050-01

200 x 125 (8 x 5)

10 x 500 ( 25/64 x 20)

2050-02

225 x 150 (9 x 6)

12 x 600 ( 1/2 x 24)

2050-03

300 x 150 (12 x 6)

12 x 900 ( 1/2 x 36)

2050-04


 SUPPORT STANDS, RECTANGULAR, STEEL BASES

 

Consists of a base made from 3mm thick steel sheet with rubber feet for stability. The base has a hole drilled, close to the edge (except the 300 x 150mm base, which has two holes). Supplied with a plated steel rod which can be easily screwed to the base for storage. Which has black enamel finish with an undercoating on the bottom.

Base Size (l x w)
mm (in)

Rod Size (d x l)
mm (in)

Cat. No.

150 x 100 (6 x 4)

10 x 450 ( 25/64 x 18)

2051-01

200 x 125 (8 x 5)

10 x 500 ( 25/64 x 20)

2051-02

225 x 150 (9 x 6)

12 x 600 ( 1/2 x 24)

2051-03

300 x 150 (12 x 6)

12 x 900 ( 1/2 x 36)

2051-04


 TRIPOD BASES WITH RODS

 

Heavy cast iron base with three point support for stability. It is drilled and threaded to accommodate a plated steel rod. The base is finished with chemical-resistant enamel paint. Size is the distance from the center of the base to the end of the tripod foot.

Size
mm (in)

Rod Size (d x l)
mm (in)

Cat. No.

100 (4)

10 x 500 ( 25/64 x 20)

2054-01

150 (6)

12 x 900 ( 1/2 x 36)

2054-02


 TRIPOD STANDS, SINGLE RING

 

For supporting small objects over a burner such as crucibles, evaporating dishes etc.

Consists of a hammertone finished cast iron circular ring diameter 100mm (4in), with three threaded and detachable plated legs which are sloped outward for stability. Shipped unassembled.

Overall Height
mm (in)

Cat. No.

150 (6)

2056-01

230 (9)

2056-02


 RING STAND

 

Comprised of a cast enamel finished ring o.d. about 11.5cm supported on three detachable, plated steel legs about 20cm high.

Cat. No.

2056-11


 RING STAND

 

As above but with plated ring.

Cat. No.

2056-12


 TRIPOD STAND WITH CONCENTRIC RINGS

 

For supporting various sizes of crucibles, and apparatus.

Consists of a circular tripod stand with two removable concentric rings. The plated steel legs are detachable and sloped outwards for stability. Outer diameter of the ring is 150mm (6in) and overall height is 220mm (8 5/8in). Black enamel finish. Shipped unassembled.

Cat. No.

2057-01


 TRIPOD STAND, PLATED TOP

 

Triangular shape top with each side approximately 125mm (5in) and detachable legs sloped outwards for stability. Overall height is approximately 220mm (8 5/8in). Made of plated steel.

Cat. No.

2058-01


<Prev | Top | Next>