|
CLAMP EXTENSION, FOUR-PRONG
 |
For providing a firm grip on objects of diameter from 2mm to 90mm.
Four pronged clamp of cast alloy with brass thumbscrew and cork lined jaws. Overall length approximately 240mm.
|
CLAMP, EXTENSION, RUBBER COVERED JAWS
|
For ensuring a firm grip on small round or irregularly shaped objects.
Three pronged aluminum die-cast clamp with brass thumbscrew. Jaws are covered with replaceable rubber tube, which open from 3-90mm. Overall length approximately 250mm .
|
CLAMP HOLDER, RIGHT ANGLE
|
For connecting two rods at right angles forming L or T shape.
Made of die-cast alloy with plated brass thumbscrews. It can accept or be clamped to rods up to 18mm diameter.
|
ALCHOL BURNER
|
Permanent wick, no replacements needed. Tank capacity 100ml suffiecient for 1 1/2 hours use.
|
DOUBLE WICK BURNER
|
All metal, leak proof alcohol burner.
Permanent double wick for extra heating, no replacements needed.
Tank capacity 100mL
|
ALCOHOL BURNER (LAMP), GLASS
|
Suitable for student use.
Made of molded soda glass with tightly fitting sealed brass cap. Alcohol is poured by removing threaded brass wick holder. Equipped with a glass cap for extinguishing the flame and to prevent evaporation of alcohol. Capacity about 125mL.
|
ALCOHOL BURNER, ANGULAR
|
Angular shape allows it to be used while tilted.
Glass with brass cap
Replacement wicks, bag of 12
|
BUNSEN BURNER FOR PROPANE
GAS, SIMPLE
|
A heavy base with brass mixing pipe 13mm diameter and a 9mm diameter serrated gas inlet tube.
|
BURNER, TECLU, FOR PROPANE GAS
|
For obtaining a very hot flame, suitable for glass work and soldering.
Consists of a plated brass tube (h x o.d.), 105 x 13mm with threaded disc valve for adjustment of the air/gas mixture. Conical mixing section. Base diameter about 80mm and overall height 120mm. Serrated inlet tube diameter 9mm. Suitable for propane gas.
|
BURNER WING TOPS
|
For obtaining broad, fishtail flame that heats large area and smoothly bends glass. Also useful for flame tests and paint stripping.
Made of brass. Fits over a range of burner mixing tubes.
|
Outer Diameter
mm (in) |
Cat. No. |
|
11 (7/16) |
2067-01 |
|
13 (1/2) |
2067-02 |
|
16 (5/8) |
2067-03 |
|
18 (11/16) |
2067-04 |
|
|