SPECIFIC GRAVITY BLOCK WITH HOOK

For showing that specific gravity depends on the nature of the material being tested.
These cubes are carefully machined to 32mm on each side. Provided with a brass hook.
Material 
Cat. No. 
Aluminum  352001 
Brass  352002 
Iron  352003 
Lead  352004 
Copper  352005 
Zinc  352006 

DENSITY CYLINDER SET (EQUAL MASS DENSITY SET)

To prove the inverse relationship between density and length of cylinders of equal mass and diameter.
This set consists of one each of machine turned cylinders of diameter 15mm, of equal masses, approx. 100g, of metals aluminum, lead, copper, brass, and zinc having the same diameter. Packed in a cardboard box.
Note: Similar density cylinders made of materials like nylon, polyvinyl chloride & polyethylene can also be supplied.

CYLINDER SET, METALS

Set of six cylinders of aluminum, brass, copper, iron, lead and zinc. Packed in a cardboard box.
Diam. x Height 
Cat. No. 
10 x 30mm  352501 
10 x 40mm  352502 

CYLINDER SET, METALS

Set of four cylinders of (d x h), 50mm x 13mm, one each of aluminum, brass, copper, and steel. Packed in a cardboard box.

CYLINDER FOR DENSITY DETERMINATION, ALUMINUM

The cylinder measures 75mm long x 25mm diameter with a suspension hook.

BUCKET AND CYLINDER
(ARCHIMEDES PRINCIPLE SET)

To demonstrate that a body submerged in water loses weight equal to the volume of water it displaces.
Consists of two brass pieces of equal volume. A solid cylinder 60mm long with a suspension hook at one end and a close fitting hollow bucket with a suspension loop at one end and a hook (handle) at the other end. Overall extended length is about 160mm.

OVERFLOW CAN

For determining the volume of an irregularly shaped body when used in conjunction with a catch bucket. Suitable for density cylinders, sinkers and Archimedes principle devices.
Made of galvanised steel sheet. The spout is properly angled to accurately measure displaced liquid. Hammer tone finished.
h x d 
Cat. No. 
120 x 65mm  353601 
225 x 125mm  353602 

