MECHANICS

Biology | Electricity & Magnetism | Heat | Light | Mechanics | Sound

Laboratoryware | Porcelainware | Glassware| Online Store

<Prev | Next>

 PULLEY, FIXED, FOR MOUNTING ON PLANE SURFACE

 

Suitable for experiments involving inclined plane where mounting on plane surfaces is required.
Consists of a pulley, diameter 37mm mounted in bracket having two fixing holes for screwing on to a surface. Both parts are made of aluminium.

Cat. No.

3464-00


 PULLEY, SINGLE, CLAMP TYPE, BENCH MOUNTING

 

For clamping on bench tops or boards.
Aluminum pulley, diameter 50mm with V-groove, is mounted on a frictionless cone bearing and fitted on a frame with clamp for fixing to any surface upto 25mm thick with a thumbscrew. Enamelled finish.

Cat. No.

3465-00


 PULLEY WITH ROD

 

For applications where a pulley is to be supported at various heights and angles. Specially suited for inclined plane experiment.
A plastic pulley, diameter 50mm is mounted on a metal frame attached to a plated rod about 10mm in diameter and 15cm long.

Cat. No.

3466-00


 PULLEY WITH TABLE CLAMP

 

Useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley can be removed and used separately.
Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a 50mm diameter pulley and rod. Pulley adjusts to 10cm height (minimum) and rotates a full 360.

Cat. No.

3467-00


 PULLEY, SINGLE, WITH THREE-WAY ATTACHMENT

 

For clamping to vertical or horizontal rods and to laboratory tables, boards etc..
Comprised of a specially designed cast bracket which can be clamped on flat surface 38mm thick and hold a supporting rod 13mm diameter. At the rear of the bracket, a light alloy pulley about 70mm diameter is mounted on brass bearings. Includes two clamping screws for fitting to bench and vertical rod support. Hammertone stove enamel finish.

Cat. No.

3468-00


 PULLEYS, PLASTIC

 

Made of rigid colored plastic with deep V-grooves. Balanced for free movement. Pulleys are about 50mm in diameter and are mounted in parallel mode on aluminum strips with hooks at both ends. Individually packed.

Type

Cat. No.

Single

3470-01

Double

3470-02

Triple

3470-03

Quadruple

3470-04


 PULLEY, PLASTIC, TANDEM, DOUBLE

 

Made of rigid colored plastic with deep V-grooves. Balanced for free movement. Pulleys are about 50mm and 37mm in diameter and are mounted in tandem mode on aluminum strips with hooks at both ends. Individually packed.

Cat. No.

3470-05


 PULLEY PLASTIC, TANDEM TRIPLE

 

Made of rigid colored plastic with deep V-grooves. Balanced for free movement. Pulleys are about 50mm, 37mm and 25mm in diameter and are mounted in tandem mode on aluminum strips with hooks at both ends. Individually packed.

Cat. No.

3470-06


<Prev | Top | Next>